DESCRIPTION and APPLICATION
W-312A is a line array system which is made of one 12" neodymium housed in bandpass box to deliver ultra powerful bass driver, two 6.5" neodymium midrange speaker units of well-designed of waves phase horn loading technique, two 3" titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-312A is a compact line array enclosure designed to bring superb line array performance to large stadiums, big outdoor concerts and commercial events. It meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installations. W-312A may be used without subwoofers in many applications.It may also be complemented by ground stacked subwoofers CVR S-218/CV-218B.
| Model |
W-312A
|
| Type |
Line array system |
| Frequency Response |
45Hz-20KHz±3dB |
| Directivity index(Dl) |
12(±2)1.2KHz-16KHz |
| Power handing |
LF 500W(RMS)1000W(PEAK) |
|
MF 300W(RMS)600W(PEAK)
|
| HF 200W(RMS)400W(PEAK) |
| Sensitivity |
LF 104dB(1W/1M) |
| MF 107dB(1W/1M) |
| HF 111dB(1W/1M) |
| Max S.P.L |
LF 131dB(PEAK/1M) |
| MF 132dB(PEAK/1M) |
| HF 134dB(PEAK/1M) |
| LF section |
1×12" (310mm)neodymium woofer |
| 75mm(3in)coil |
| Nominal impedance |
8 ohm |
| MF section |
2×6.5"(170mm)neodymium MF |
| 50mm(2in)coil |
| Nominal impedance |
16 ohm |
| HF section |
2×3"neodymium compression driver |
| with 72mm titanium diaphragm |
| Nominal impedance |
16 ohm |
| Output section |
3-channel |
| Dispersion pattern |
110°H×7°V |
| Finish |
Water-proof,wear-resistant textured black paint |
| Array design |
Arrays of less than 3×W-312 will |
| provide poor dispersion control and |
| are neither recommended nor supported |
| Speaker cables |
LF 1(+)1(-) MF 2(+)2(-) HF 3(+)3(-) |
| Rigging system |
Please refer to the W-312 user |
| manual before any operation |
| Input connectors |
2×Neutrik Nl8 |
| Recommend crossover |
LF 45Hz-400Hz |
| MF 400Hz-1800Hz |
| HF 1800Hz-20KHz |
| Dimensions |
1130×398×530mm(W×H×D) |
| Package dimensions |
1190×475×610mm/0.34cbm |
| Enclosure |
Birch plywood |
| Net weight |
66kg |
| Gross weight |
70kg |
