DESCRIPTION and APPLICATION
W-25 is a line array system which is made of two 5 woofers, a 1.5 titanium compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required,a W-25 will integrate seamlessly with W-208P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-25 is veryversatile and scalable for a wide range of applications in touring performance,corporate and fixed installation fields.
W-208P is a dedicated high performance sub-bass system designed to augment the low frequency output of W-25. The W-208 features a highly efficient power amp module and incorporate DSP. This efficient design enables the flown combination of W-208P and W-25.The physical dimensions of W-208P are identical to the W-25 and it's equipped with the same proprietary rigging system.It's features with a 12 inch neodymium woofer with magnet structure and suspensions engineered for maximum linear excursion.
|
Model
|
W-25 & W-208P
|
|
Type
|
Line array system
|
|
Line array sub-bass system(W-208P)
|
|
Frequency Response
|
90Hz-20KHz±3dB
|
|
45Hz-150Hz±3dB(W-208P)
|
|
Power handing
|
LF 160W(RMS)320W(PEAK)
|
|
HF 60W(RMS)120W(PEAK)
|
|
400W(RMS)800W(PEAK)(W-208P)
|
|
Sensitivity
|
LF 92dB(1W1M)
|
|
HF 108dB(1W1M)
|
|
103dB(1W1M)(W-208P)
|
|
MaxS.P.L
|
LF 114dB(PEAK/1M)
|
|
HF 126dB(PEAK/1M)
|
|
129dB(PEAK/1M)(W-208P)
|
|
LF section
|
2×5"(135mm) woofer
|
|
35mm(1.5in)coil
|
|
Components
|
2×8"(210mm)woofers
|
|
65mm(2.5in)coil(W-208P)
|
|
Nominal impedance
|
16 ohm
|
|
4 ohm(W-208P)
|
|
HF section
|
1×1.4"compression driver
|
|
with 34mm titanium diaphragm
|
|
Nominal impedance
|
16 ohm
|
|
Output section
|
2-channel
|
|
Dispersion pattern
|
110°H×9°V
|
|
Finish
|
Black paint
|
|
Array design
|
Arrays of less than 3×W-25 will
|
|
provide poor dispersion control and
|
|
are neither recommended nor supported
|
|
Speaker cables
|
1(+)1(-)
|
|
1(+)1(-) (W-208P)
|
|
Rigging system
|
Please refer to the W-25 user
|
|
manual before any operation
|
|
Input connectors
|
2×NL4MP speakon
|
|
Recommend crossover
|
80Hz-20KHz
|
|
|
|
42Hz-120Hz(W-208P)
|
|
Dimensions
|
458×165×225mm(W×H×D)
|
|
460×255×485.5mm(W×H×D)(W-208P)
|
|
Package dimensions
|
530×235×295mm/0.04cbm
|
|
530×325×560mm/0.1cbm(W-208P)
|
|
Enclosure
|
PU(W-25)/Plywood(W-208P)
|
|
Net weight
|
8.5kg(W-26) / 19.5kg (W-208P)
|
|
Gross weight
|
10kg(W-26) / 22kg (W-208P)
|
