Product Description

DESCRIPTION and APPLICATION
The W-8 is a line array system which is made of two 12” neodymium woofers, four 6.5” midrange speaker units, two 3”  titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi-speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two waves guide plates are set in between to eliminate its interfere.Each enclosure is equipped  with rigging system, allowing flown array to be constructed rapidly and safely.

Model	W-8
Type	Line array system
Frequency Response	45Hz-20KHz±3dB
Directivity index(DI)	12(±2)1.2KHz-16KHz
Power handling	LF 1200W(RMS)2400W(PEAK)
	MF 600W(RMS)1200W(PEAK)
	HF 200W(RMS)400W(PEAK)
Sensitivity	LF 101dB(1W1M)
	MF 104dB(1W1M)
	HF 111dB(1W1M)
MaxS.P.L	LF 132dB(PEAK/1M)
	MF 132dB(PEAK/1M)
	HF 134dB(PEAK/1M)
LF section	2×12" (310mm)neodymium woofer
	75mm(3in) coil
Nominal impedance	8 ohm
MF section	4×6.5" (170mm)neodymium MF
	50mm(2in)coil
Nominal impedance	16 ohm
HF section	2×3"neodymium compression driver
	with 75mm titanium diaphragm
Nominal impedance	16 ohm
Output section	3-channel
Dispersion pattern	110°H×7.5°V
Finish	Water-proof,wear-resistant textured black paint
Array design	Arrays of less than 3×CV-8 will
	provide poor dispersion control and
	are neither recommended nor supported
Speaker cables	LF 1(+)1(-) 2(+)2(-) MF 3(+)3(-) HF 4(+)4(-)
Rigging system	Please refer to the CV-8 user
	manual before any operation
Input connectors	2×Neutrik NL8
Recommend crossover	LF 45Hz-400Hz
	MF 400Hz-1200Hz
	HF 1200Hz-20KHz
Dimensions	1100×405×595mm(W×H×D)
Package dimensions	1170×475×665mm/0.37cbm
Enclosure	Birch Plywood
Net weight	65kg
Gross weight	69kg

Payment Terms︰ L/C,D/A,D/P,T/T,Western Union,MoneyGram

Product Image